1) Simple structure in linear type ,easy in installation and maintation.
2) Adopting advanced world famous brand components in pneumatic parts ,electric parts and operation parts.
3) High pressure double crank to control the die opening and closing.
4) Running in a high automatization and intellectualization,no pollution
5) Apply a linker to connect with the air conveyor ,which can directly inline with filling machine .
Today I will tell you about the measures taken during the running-in period of the water well drilling rig.
1. Pay attention to the working load during the running-in period. The working load during the running-in period should not exceed 80% of the rated working load, and appropriate workload should be arranged to prevent overheating caused by the continuous operation of the machine for a long time.
2. Pay attention to observe the indication of each instrument frequently. In case of any abnormality, stop the vehicle in time to eliminate it
3. Attention should be paid to strengthen the lubrication of each lubricating point. It is recommended that lubricating grease should be added to the lubricating point every shift during the running-in period (except for special requirements).
4. Pay attention to keep the machine clean and timely adjust and fasten loose parts.
5. At the end of the running-in period, the machine shall be subject to compulsory maintenance, inspection and adjustment, and attention shall be paid to the replacement of oil.
In short, the requirements for the use and maintenance of water well drilling rig during the running-in period can be summarized as follows: reduce the load, pay attention to inspection and strengthen lubrication. As long as you pay attention to and implement the maintenance and maintenance of construction machinery during the running-in period as required, you will reduce the occurrence of early failures, extend the service life, improve the operation efficiency, and bring more economic benefits to you.
